+

  • 課程簡介
  • 認證資格
  • 課程內容
  • 適合人仕
  • 課程時間/費用

Cisco CCNP 國際認可証書課程

"全新 CCNP 2014課程 "

** 8週年大優惠 **
現凡報讀CCNP (CCNP822) 課程均可享全科全額合格保障


免費試讀!

CCNP

CCNP 全名為 Cisco Certified Network Professional
是現時全世界最熱門的認證。

我們的 Cisco CCNP 課程已經全面更新課程內容,以迎合全新 2014 的 Cisco CCNP 考試需要,課程內包括課本筆記及最新的 CCNP 2014 三科模擬試題全套 。

****課程採用全新購置的 Cisco 2800 及 3800系列 Router 上課 ****
同學在完成課程後直接在本中心內的認可考場應考CCNP考試,節省時間!


Cisco 官方指明的要求:
The exam will certify that the successful candidate has important knowledge and skills necessary to use advanced IP addressing and routing in implementing scalability for Cisco ISR routers connected to LANs and WANs.


為了考取 Cisco 的最新 CCNP 認証,請各位同學一定要選擇以 Cisco 2800 Series ISR Routers with IOS 12.4 來進行實習的教育中心才好報讀! 用 Cisco 2600 系列 Routers 或 IOS 版本只有 12.3 的亦不適合!

注意 1: 務請各同學於報讀 Cisco 課程前,確認教育中心給你們做實習的器材必須為 2800 Series ,而非 2600 Series,以免受騙!

注意 2: 由於 Troubleshooting 考試會集中考 Switch 及 Router 的偵察及解決問題技能,故學員必須先學習 Cisco IP Switched Networks 科目及 Cisco IP Routing 科目內各項技術的實踐技能,才能明白 Troubleshooting 科目內的偵察及解決問題技能!故為確保課程的學習質素,本中心的教學次序必須為 :

1. 642-813 Implementing Cisco IP Switched Networks  
2. 642-902 Implementing Cisco IP Routing
3. 642-832 Troubleshooting and Maintaining Cisco IP Networks

並且不接受插班生!



Cisco Certified Network Professional (CCNP) 是除 CCNA 外, 另一張由 Cisco 所制定的高級網絡專家認可證書,亦是全球公認的專業認可資格。這張證書主要目的是讓網絡工程師能在現今變化迅速的資訊網絡環境中,都能掌握和擁有最先進的網絡技術,任何時候都能保持領導地位。

本中心的CCNP課程籌備多時,精心編排。由上堂、溫習、實習、考試研習、做試題至最後考試,均為你度身訂造,作出有系統的編排。務求真正教識你,又令你考試及格。

我們的 CCNP 課程適合任何對電腦網絡有興趣的人仕修讀, 當然要考取 CCNP 的條件會相對地比 CCNA 為高。首先要成功考取 CCNA ,然後就再通過三個科目的專業考試,包括 : 642-813 Switched Networks, 642-902 Routing 及 642-832 Troubleshooting。

本課程專為 CCNP 證書而設,課程由淺入深,讓各學員透徹了解。66 小時一人一 2800 Series Router 實習課程,完成課程後,即可報考有關之考試。

 



為迎合 Cisco 最新的 CCNP 考試的要求,
本中心更投資六十多萬元向Cisco 購買全新的網絡器材以供學生實習使用,當中更包括:
Cisco 課程最新要求的 2800 Series Integrated Services Router(ISR), 3800 Series ISR Router, 2950, 3550 及 3560 Cisco Switch, Cisco Wireless LAN Controller (2106), Cisco Aironet Lightweight Access Point (1130AG)等。

[其它中心還在使用舊式的 1900 Switch 及 2600 Series Router]

注意!2600 Series 的 Router 並不支援 Cisco 最新的 ISR 12.4 功能!而 Cisco 最新的要求是必須以 Cisco ISR routers 及 IOS version 12.4 來進行實習,此為坊間一般教育中心及模擬器(Simulator)所不能提供的!


保證一人一 2800 Series Router 課堂實習,
合格保證!

 

選擇 EasyPass 的Cisco課程8大理由!

易通識電腦培訓中心

坊間一般的培訓中心

Cisco 課程由最高資格的CCIE設計課程及編寫詳盡中英對照筆記
[免除溫習內容艱深的參考書]
(歡迎到本中心參考我們精心制作的筆記以作比較!)

使用不知名導師製作的簡單 Powerpoint 及不詳盡的筆記上課
[溫習時要閱讀內容艱深的參考書]

Cisco 課程提供全部科目合格保證

Cisco 課程只提供部份科目或沒有合格保證

提供最新Latest!及精要模擬題目作溫習

提供過量, Outdate甚至沒有模擬題目作溫習

提供免費高清課堂錄像作即時溫習及補堂之用,時間彈性!

要等待課程再開班及有學位時才能補堂,費時失事!

Cisco課程學生1人1部最新的2800 Series系列 Router上課

Cisco課程學生只能1人1部舊式的 2600 Series系列 Router上課或沒有 真實Router器材,只用功能不全面的 Router 模擬器作有限的實習

代學生登記報名所有課程的公開認証考試

學員須要自己登記報考公開認証考試

完成課程後直接在本中心內的認可考場應考CCNP考試,節省時間! 須要安排學員到其它偏遠考場考試!浪費交通時間!

質素保證!所有課程均有免費試讀

沒有免費試讀,不能體驗教學質素!

 

CCNP (Cisco Certified Network Professional) 的認證資格

應試者需要滿足下列要求:

科目 (需要 3 項考試)

Cisco CCNP 考試分為3 部份 :

642-813 Implementing Cisco IP Switched Networks(SWITCH)
642-902 Implementing Cisco IP Routing(ROUTE)
642-832 Troubleshooting and Maintaining Cisco IP Networks(TSHOOT)

 

(642-902) Implementing Cisco IP Routing (ROUTE)
試題數量: 50-60 題
考試時間: 120 分鐘
合格分數: 790 / 1000 分
模擬試題參考

(642-813) Implementing Cisco IP Switched Networks (SWITCH)
試題數量: 50-60 題
考試時間: 120 分鐘
合格分數: 804 / 1000 分
模擬試題參考

(642-832) Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)
試題數量: 50-60 題
考試時間: 120 分鐘
合格分數: 790 / 1000 分
模擬試題參考

 

考試是由遍佈世界各地的獨立認可考試組織 Virtual University Enterprises 在世界各地主持舉行。

授課導師擁有10年認可考試課程教學經驗,同學在完成66個小時的專業課程後,我們更安排學生在VUE認可考試中心報考,每科考試費用為$1957,考取合格後即可成為Cisco CCNP。

課程內容:

642-813 SWITCH: Implementing Cisco IP Switched Networks (24 hours)

Implement VLAN based solution, given a network design and a set of requirements

  • Determine network resources needed for implementing a VLAN based solution on a network
  • Create a VLAN based implementation plan
  • Create a VLAN based verification plan
  • Configure switch-to-switch connectivity for the VLAN based solution
  • Configure loop prevention for the VLAN based solution
  • Configure Access Ports for the VLAN based solution
  • erify the VLAN based solution was implemented properly using show and debug commands
  • Document results of VLAN implementation and verification

 

Implement a Security Extension of a Layer 2 solution, given a network design and a set of requirements

  • Determine network resources needed for implementing a Security solution
  • Create a implementation plan for the Security solution
  • Create a verification plan for the Security solution
  • Configure port security features
  • Configure general switch security features
  • Configure private VLANs Configure VACL and PACL
  • Verify the Security based solution was implemented properly using show and debug commands
  • Document results of Security implementation and verification

 

Implement Switch based Layer 3 services, given a network design and a set of requirements

  • Determine network resources needed for implementing a Switch based Layer 3 solution
  • Create an implementation plan for the Switch based Layer 3 solution
  • Create a verification plan for the Switch based Layer 3 solution
  • Configure routing interfaces Configure Layer 3 Security
  • Verify the Switch based Layer 3 solution was implemented properly using show and debug commands
  • Document results of Switch based Layer 3 implementation and verification

 

Prepare infrastructure to support advanced services

  • Implement a Wireless Extension of a Layer 2 solution
  • Implement a VoIP support solution
  • Implement video support solution

 

Implement High Availability, given a network design and a set of requirements

  • Determine network resources needed for implementing High Availability on a network
  • Create a High Availability implementation plan
  • Create a High Availability verification plan
  • Implement first hop redundancy protocols
  • Implement switch supervisor redundancy
  • Verify High Availability solution was implemented properly using show and debug commands
  • Document results of High Availability implementation and verification

642-902 ROUTE: Implementing Cisco IP Routing s (30 hours)

Implement an EIGRP based solution, given a network design and a set of requirements

  • Determine network resources needed for implementing EIGRP on a network
  • Create an EIGRP implementation plan
  • Create an EIGRP verification plan
  • Configure EIGRP routing
  • Verify EIGRP solution was implemented properly using show and debug commands
  • Document results of EIGRP implementation and verification

 

Implement a multi-area OSPF Network, given a network design and a set of requirements

  • Determine network resources needed for implementing OSPF on a network
  • Create an OSPF implementation plan
  • Create an OSPF verification plan
  • Configure OSPF routing
  • Verify OSPF solution was implemented properly using show and debug commands
  • Document results of OSPF implementation and verification plan

 

Implement an eBGP based solution, given a network design and a set of requirements

  • Determine network resources needed for implementing eBGP on a network
  • Create an eBGP implementation plan
  • Create an eBGP verification plan
  • Configure eBGP routing
  • Verify eBGP solution was implemented properly using show and debug commands
  • Document results of eBGP implementation and verification plan

 

Implement an IPv6 based solution, given a network design and a set of requirements

  • Determine network resources needed for implementing IPv6 on a network
  • Create an IPv6 implementation plan
  • Create an IPv6 verification plan
  • Configure IPv6 routing
  • Configure IPv6 interoperation with IPv4
  • Verify IPv6 solution was implemented properly using show and debug commands
  • Document results of IPv6 implementation and verification plan

 

Implement an IPv4 or IPv6 based redistribution solution, given a network design and a set of requirements

  • Create a redistribution implementation plan based upon the results of the redistribution analysis
  • Create a redistribution verification plan
  • Configure a redistribution solution
  • Verify that a redistribution was implemented
  • Document results of a redistribution implementation and verification plan
  • Identify the differences between implementing an IPv4 and IPv6 redistribution solution

 

Implement Layer 3 Path Control Solution

  • Create a Layer 3 path control implementation plan based upon the results of the redistribution analysis
  • Create a Layer 3 path control verification plan
  • Configure Layer 3 path control
  • Verify that a Layer 3 path control  was implemented
  • Document results of a Layer 3 path control implementation and verification plan
  • Implement basic teleworker and branch services
  • Describe broadband technologies
  • Configure basic broadband connections
  • Describe basic VPN technologies
  • Configure GRE
  • Describe branch access technologies

642-832 Troubleshooting and Maintaining Cisco IP Networks (12 hours)

Maintain and monitor network performance

  • Develop a plan to monitor and manage a network
  • Perform network monitoring using IOS tools
  • Perform routine IOS device maintenance
  • Isolate sub-optimal internetwork operation at the correctly defined OSI Model layer

 

Troubleshoot Multi Protocol system networks

  • Troubleshoot EIGRP
  • Troubleshoot OSPF
  • Troubleshoot eBGP
  • Troubleshoot routing redistribution solution
  • Troubleshoot a DHCP client and server solution
  • Troubleshoot NAT
  • Troubleshoot first hop redundancy protocols
  • Troubleshoot IPv6 routing
  • Troubleshoot IPv6 and IPv4 interoperability
  • Troubleshoot switch-to-switch connectivity for the VLAN based solution
  • Troubleshoot loop prevention for the VLAN based solution
  • Troubleshoot Access Ports for the VLAN based solution
  • Troubleshoot private VLANS
  • Troubleshoot port security
  • Troubleshoot general switch security
  • Troubleshoot VACL and PACL
  • Troubleshoot switch virtual interfaces (SVIs)
  • Troubleshoot switch supervisor redundancy
  • Troubleshoot switch support of advanced services (i.e., Wireless, VOIP and Video)
  • Troubleshoot a VoIP support solution
  • Troubleshoot a video support solution
  • Troubleshoot Layer 3 Security
  • Troubleshoot issues related to ACLs used to secure access to Cisco routers
  • Troubleshoot configuration issues related to accessing the AAA server for authentication purposes
  • Troubleshoot security issues related to IOS services (i.e.,finger, NTP, HTTP, FTP, RCP etc.)

適合人仕 :
技術支援人員,系統工程師,
網絡工程師,網絡分析員, I.T 部門主管 / 經理。

修讀條件
:
-具有基礎 Windows 操作經驗
-已擁有 CCNA 知識人仕
-對互聯網及 Internetworking 具有濃厚與趣


Cisco CCNP Certifiate


課程包括 :
- 導師精心編製 CCNP 2014 筆記, Cisco Press 及 Sybex 出版之 CCNP 電子書 及超過15本 CCNP 認証考試的電子書課本
- 課堂上 理論和實習同時進行,一人一 2800 Series Router 互相連接進行一系列實習
( 並非市面上其他 CCNA 課程只使用 Router Simulator 軟件或舊式 2600 Series Router )
- 三十多個不同型號的 Cisco Router 免費任用,方便同學課餘時間都可以實習
- 再配合 Router Simulator v5.0 及最新 Boson RouterSim v6.0 兩套,提早適應考試的 Simulation 環境
- 以及 Cisco Packet Tracer 5.21 (由 Cisco Systems 設計的 Router Simulator)
- 支援 Cisco IOS Command 的 Dynamips Server Cisco 7200 Router Simulator

- CCNP 多媒體電子教材
- 全新8 月份更新的模擬試題連參考答案 (模擬試題 "一年" 免費更新保證,考試更有彈性)
- 保證一次過合格,否則半費重考
- 免費提供高清視像影片作補堂或重溫之用 (不用等侯,即時補堂)

Cisco Systems 設計的 Router Simulator :
Cisco Packet Tracer 4.1


能支援所有 Cisco IOS Command 的
Dynamips Server Cisco 7200 Router Simulator

為增強本中心 CCNP 課程 的 學生質素,我們投放大量資源購買三十多個不同型號的 Cisco Router ,包括 2800 、3640 系列,以及 Cisco Catalyst 2900 / 3550 / 3560/ 5000 Series FastEthernet Gigabit Switch ,理論和實習同時進行,讓同學有不明白之時可即時發問,知識更加容易吸收,事半功倍。

Cisco 2800 Series Router Cisco 2800 Series Router
   
Cisco 2800 Series Router Cisco 2800 Series Router
   
Cisco 2800 Series Router
WIC-2T Interface Card WIC-2T Interface Card
本課程的整套實習器材為:
26部全新購置的 Cisco Routers (ISR 系列的 2800)
註: ISR的全名為Integrated Services Routers (集成服務路由器),意指能將下列服務集結於一身:
[符合 Cisco 最新的考試要求]
1. Routing
2. Security and VPN (Virtual Private Network)
3. Voice
4. Wireless
5. Optimization of network bandwidth and applications (意即實施QoS,Quality of Service)
 
11部Cisco Routers (3部2500、2部2600、3600及ISR系列的800、3部2800及3800)
Cisco Switches (2950、3550、3560)
Cisco Voice Modules
Cisco IP Phones (7911G)
Cisco Wireless LAN Controller (2106)
Cisco Aironet Lightweight Access Point (1130AG)

授課語言 : 以廣東話授課為主,亦會以英語輔助。
課程全長 : 66小時 / 共 22


開課日期 : (全 3 科保證合格!)

CCNP 課程 / CCNP Course - 原價 HK$18,800
現特惠價 HK$5,980

[Exam Code: 642-813,642-902,642-832]
Class/Course Date Start
Video-CCNP 日間 CCNP Video 課程,Video 價 $4784 Video 課程的優點

免費試睇: 首 1 小時,請致電與本中心職員預約。
合格保障: 半費重考
享用時期: 請與我們聯絡,進度由您控制,可快可慢。

 

教學質素保證:
- 全 3 科合格保証!不幸肥佬半費重考 [獨家 ] + [ 首創 ]
- 提供最Update題目,令你最有效率通過考試
- 保証一人一機!
- 免費提供高清視像影片作補堂或重溫之用 (不用等侯,即時補堂)
- 完成課程後直接在本中心內的認可考場應考CCNP考試,節省時間!
- 彈性上課/補堂時間!詳情請電 3426-8614 查詢

課程費用 :

CCNP 國際認可証書課程 66 Hr 特價 $5,980

 

** 8週年大優惠 **

現凡報讀CCNP (CCNP822) 課程

均可享全額合格保障

 

現在報讀 CCNP 認證課程,您都可以獲得我們提供 全三科合格保證。如果您報考CCNP考試時不合格的話,我們可讓您半費重考一次,您更輕易,更有信心踏出第一步 。

最新 CCNP 2014 模擬試題

為增強本中心 CCNP 課程 的 學生質素,我們投放大量資源購買三十多個不同型號的 Cisco Router ,包括 800 、 1400 、 2500 、 2800 、 3640 及 4000 系列,以及 Cisco Catalyst 2900 / 3000 / 3500 / 5000 Series FastEthernet Gigabit Switch ,理論和實習同時進行,讓同學有不明白之時可即時發問,知識更加容易吸收,事半功倍。

CCNP
 
 
 

主頁 | 最新資訊 | 考試安排 | 免費下載 | 常見問題 | 學員需知 | 聯絡我們

Copyright 2015 © 易通識電腦培訓中心